SAP Blog by Manish Gupta

We are not going to cover the configuration of the deconsolidation process in SAP EWM. You may check this Blog for configuration.  Please make sure you set up a few products in the warehouse with different putaway strategies or different fixed bins. We have maintained 3 Products with different fixed bins so that each product will require a different WT during the Putaway process and we have maintained the Fixed Bin Putaway Strategy, Please check this   blog  in case you need to set up the putaway strategy as well. Step 1: Create a PO with all the Materials in SAP and Provide the confirmation control for Inbound creation.

  Follow the Below Steps to configure the deconsolidation process during the Putaway Process. Before you start the configuration for your EWM Warehouse using this blog, we would advise you to activate the BC set /SCWM/DECONS using Tcode SCPR20 for standard warehouse 0001 to have basic configurations ready for copying. Also, please make sure you also maintain below WPTs, Storage types, and Bins in advance. WPT — 3060, 3065, and 3070 (Refer to this  BLOG ) Storage Type — 9010, 8010, and 9030 (Refer to this  BLOG ) Storage Bin — GR-Zone (9010 Storage Type) and DEKO-BIN (8010 Storage Type) use tcode /SCWM/LS01 Part 1 : First we need to create a POSC for our warehouse to perform deconsolidation during the Putaway Process.

  We are not going to cover the configuration related to YARD Management in this blog, Please check out this Blog for configuration and YARD setup in SAP. Step 1: Create an INB delivery in the S4 system against a PO. Once that is done, check the delivery in the EWM system with Tcode /SCWM/PRDI

  Step 1: First we need to activate YARD Management for our EWM WH.

  We will create an OBD through scrapping in S4 and Post Goods Issue We are going to move stock from the EWM Sloc to the IM Sloc using the movement type 311

  We are going to post INB and perform EWM WH functions along with GR. We need to create INB in S4 so that INB can be created in the EWM and GR can be performed

 We are not going to cover the configuration related to YARD Management in this blog, Please check out this Blog for configuration and YARD setup in SAP. Step 1: Create an INB delivery in the S4 system against a PO. Once that is done, check the delivery in the EWM system with Tcode /SCWM/PRDi

  Step 1: First we need to activate YARD Management for our EWM WH.

  Step 1: First of all we need to maintain QM data for the material master using MM02 transaction code.  Inspection Type 1701 stands for the Quality Inspection during GR from external vendor when using EWM. 

  Here we are going to discuss a very basic business scenario related to QM and EWM integration which is done through Storage Control (POSC). Please check this Blog to configure the QM-EWM integration. Step 1: Create a PO with Material which already has QM view maintained and create the Inbound Delivery against the PO.

  Configuration and Business process steps Create a Number range for WO and assign it to your WH number

  Opportunistic Cross Docking Define Product Group Type and Product groups

  Configuration and Business process in SAP EWM Maintain Wave Types You can define wave types to represent the different types of waves with special characteristics and behavior. You can subsequently assign any of these wave types to the following: A wave template ( Warehouse Management -> Work Scheduling -> Wave Management -> /SCWM/WAVETMP — Maintain Wave Templates , on the  SAP Easy Access  screen) A wave, using the wave generation tool ( Warehouse Management -> Work Scheduling -> Wave Management -> /SCWM/WAVEGEN — Wave Generation Tool ,   on the  SAP Easy Access  screen) The primary purpose of assigning wave types to waves and wave templates is to enable focused monitoring in the warehouse management monitor (i.e. you can select to display waves of a particular type(s) only).

  Pack Spec Configuration and Business Process Step 1: Create a number range for PackSpec

Step 1: Create Storage Type 9010 which will act as an Interim Storage Type for Stock posted against a PO

  To integrate the SD module with SAP EWM below configurations are needed.

Posting change can be driven through erp or directly initiated in the EWM WH through transaction code /SCWM/POST using WPT 4010 or they can also be carried out using post processing framework (PPF). We need to first configure WPT 4010 in order to carry out posting changes in the EWM-managed WH.

  ADHoc movement is a transfer of product or HU from one location to another within a Warehouse. We can move a product using /SCWM/ADPROD or move an HU using /SCWM/ADHU using WPT 9999. Let us configure WPT 9999 in the EWM WH first

  We can configure replenishment at 2 levels Storage Type Level — Replenishment is done for any bin within the storage type for a product based on Max-Min and Replenishment quantity provided in the Product master. If only 2 bins are allowed for a product in the storage type and replenishment quantity requires more than 2 bins to carry out, the replenishment will happen only for 2 bins. Storage Bin Level — Replenishment happens at the assigned Bin level based on product master data. The strategies are available in EWM for replenishment Planned — This includes manually running the replenishment process, order-related replenishment which is based on open Warehouse Requests, and Crate Part replenishment which is used in Production Planning where a fixed quantity needs to be maintained for PSA. Unplanned — This includes Automatic replenishment which gets triggered during WT confirmation for a product and Direct Replenishment which gets triggered during the use of an exception code while doi

  Step 1: Configure the below settings in SPRO first

  Step 1: Setup Storage Type for the Bulk Storage

  Step 1: Configure Basic configurations for the HU

  Step 1: First we will create the Storage Type for Fixed Bin Strategy.

  We will configure the STO process for 2 Plants under the same company code and perform the necessary steps to complete the STO process.